Who Makes Guitar Tuners? Fewer Factories Than You Think

Gibson Deluxe and Grover tuners face down, both baseplates stamped P.W. for Ping-Well
Gibson Deluxe and Grover, face down. Good luck telling which is which. Both stamped P.W. © 2024 11th Fret.

Oh, so you’re “upgrading” your tuning machines? Maybe not. If you’ve ever wondered who makes guitar tuners, the answer is a lot less exciting than the logos suggest.

A handful of factories build a huge share of the tuning machines out there, and many of them carry whatever brand name the customer asks for. Not all of them, but plenty. That means the “upgrade” you just paid extra for might have come off the same production line as the stock tuners you pulled off.

Let me show you how I found out, and how you can check your own.

My Gibson SG and the P.W. stamp: Grover vs Gibson tuners

Not too long ago, I bought a used Gibson SG Special Faded that came with a broken D string tuner. It had the modern Gibson Deluxe tuners, the ones that look like vintage Klusons but use a threaded collar.

Searching for a single replacement turned up $25 to $30 price tags on Reverb, plus shipping. A full new set of Gibson Deluxe tuners was running around $90.

So I “settled” on a new set of Grovers that looked the same, or close enough. Same tulip buttons, same threaded collar. Some reviews said they weren’t as good as the Gibson versions. But it’s Grover, and I usually like Grover’s stuff, so I ordered a set.

The P.W. stamp: who makes your guitar tuners

I pulled the old Gibson tuners off and was getting ready to put the Grovers on when something caught my eye. Both sets had a “P.W.” stamp on the side that faces the wood.

Yup. Ping-Well made both the Gibson Deluxe tuners and the Grovers.

Flip them over and it gets even better. With the covers facing down, I couldn’t tell the Gibson from the Grover. Same baseplate, same shape, same P.W. stamp. As far as I’m concerned, they came off the same assembly line.

As far as I could tell, they were the same tuner. Neither one is better or worse than the other, unless you count paying about $40 more for the ones that say “Gibson” instead of “Grover” as worse. Which I do.

Once you see that stamp, the branding starts to look a lot thinner. And it isn’t just a one-off on my workbench. That’s when I started caring a lot less about the logo and a lot more about who makes guitar tuners.

The branding illusion: who makes guitar tuners for the big brands?

A lot of us still assume that big brands make all their own parts. It’s an easy belief to hold onto, because a few companies still do.

Look at Fender, Gibson, and Paul Reed Smith. Fender’s tuners usually say Fender. Gibson’s might say “Gibson Deluxe.” PRS has its own signature tuner look that’s pretty much unique to them. The pickup world works the same way: Seymour Duncan, DiMarzio, Lindy Fralin, Lollar and others assemble their pickups in the United States, but parts like bobbins, baseplates, magnets and wire come from suppliers.

Is that a bad thing? No. I’m not implying that at all. There are plenty of good economic reasons to source parts this way.

Is aftermarket hardware really an upgrade?

Plenty of players also believe they’re upgrading by buying aftermarket parts, because aftermarket is often thought of as better than stock. But as those two sets showed me, the money you just spent may have gone to hardware built in the same facility as the stock parts.

The same goes for guitars. Most of us know names like Samick, Young Chang, Cort and World Musical Instruments. These are South Korean companies, but a lot of their production happens in factories in places like China and Indonesia.

So I’d like to clear up the idea that your guitar or pedal is 100% made in the country on the sticker. Honestly, I think Chinese companies might be the only ones with a real shot at bragging about that, since so many components already come from inside China’s borders.

Then there’s Fender and Gibson, two brands that are almost synonymous with the idea of a cornerstone guitar. Builders have copied their designs over and over, and they stamp their names right on the hardware. So it’s easy to believe a “Made in USA” Fender or Gibson is all American parts, right?

Wrong. The stamp on the tuner tells you more than the name on the headstock, and once you start looking, you see the same factories over and over.

Ping-Well tuners: Gibson, Grover and Fender

Ping-Well (you’ll also see it called Ping or Ping Well) is a Taiwanese hardware maker with factories in Taiwan and China. Gibson owners on Gibson’s own forum have reported the same P.W. stamp on their Gibson Deluxe tuners. It’s widely reported that Ping has built tuners for Grover since the 1980s, though Grover’s own site doesn’t say when production moved overseas. Retailers currently list Grover products as made in Taiwan, Korea, China and the United States. What I can say for sure is what I saw on my own bench: the Grover Deluxe set I bought had a P.W. stamp, same as the Gibson Deluxe tuners it replaced.

And it doesn’t stop at Gibson and Grover. If you want to know who makes guitar tuners on a lot of Gibson, Grover and Fender hardware, look for a P.W. stamp.

Fender tuners and bridges

Fender used to lean on Schaller for a lot of its tuners, and those got more expensive over the years. So it moved much of that work to Ping. Its own locking tuners, for example, used to come from Schaller in Germany, and Ping makes them now. I’ve got one right here, and it’s stamped P.W. on the housing. Many of the other Fender-branded tuners I’ve seen carry the same stamp.

It’s not just tuners, either. The two-point vibrato bridge on certain Fender Deluxe and Classic Player models is a Ping-made unit, stamped PW.

Again, I’m not China-shaming here. Or Taiwan-shaming, for that matter. I’m just pointing out what’s on your “Made in USA” $2,500 Fender or $3,000 Gibson: hardware built overseas by the same supplier that sells to everyone else.

Jin-Ho tuners and the private label market

Ping-Well isn’t the only shared factory. There are plenty of other hardware makers you’ll run into once you start looking. One of my favorite finds was Guitar Fetish (GFS) calling its Slick tuners its “own design.” That’s not exactly wrong, since the brass buttons up top are theirs. But the tuners I’ve seen underneath came from Jin-Ho. I’ve used other GFS parts too, including the Surf 90s on a $220 Gretsch I brought back from the dead.

Jin-Ho is a South Korean tuner manufacturer that’s commonly reported to make OEM tuners for a lot of import guitars. Its tuners can be marked “JH,” “Jinho,” “Jin-Ho,” or, oddly enough, “Zee Noo.” Buy a replacement set and you might even get a mix of Zee Noo and Jin-Ho stamps in the same box.

Who sells Jin-Ho tuners under their own name?

Jin-Ho tuners are all over the budget parts market from sellers like Musiclily and Dopro. They also get private labeled and sold as budget upgrades. Wilkinson-branded locking tuners from Jin-Ho are easy to find, and I’ve seen the same hardware under brands like Tone Ninja and GFS.

Different logos, different boxes, same source.

Hanchang: the Korean tuners behind PRS and Hipshot

Another South Korean name turns up a lot once you start pulling tuners. Hipshot, Paul Reed Smith, and even some Fenders use a company called Hanchang for tuners. Hipshot’s manufacturing partner in South Korea makes the licensed tuners (Hipshot’s USA Ultralite line is a separate, US-made product). PRS uses Hanchang tuners on its SE guitars, and Hanchang tuners have turned up as stock parts on some Mexican-made Fender basses.

From what I’ve been able to gather, Hanchang does its manufacturing in South Korea. Look for an HC mark on the housing. I’ve seen it firsthand: pull one of my Hipshot Grip-Lock tuners and the HC stamp is right there.

Personally, I’ve had nothing but great experiences with Hanchang tuners, specifically the Hipshots. They’ve been solid and incredibly stable.

Graph Tech Ratio tuners

Graph Tech‘s Ratio tuners are a different animal. Graph Tech founder Dave Dunwoodie patented the idea of giving each string its own gear ratio so they all tune at the same rate (US patent 8,859,868 B2). The company is based in Delta, British Columbia, and its own store lists many Ratio sets as made in South Korea. It also says it has production facilities in Korea, and import records also show Hanchang shipping guitar parts to Graph Tech, so either is possible, but I haven’t seen a Ratio with a factory stamp that settles it. If you’ve got a set, pull one and check the housing.

FJB tuners: the stamp you’ll find on budget imports

If you own a budget import, there’s a good chance you’ve already met FJB. That stamp belongs to Yuyao Boyun Musical Instruments Co., Ltd., a hardware maker in China, and it turns up on stock tuners on a lot of inexpensive guitars. I’ve seen it on plenty of Squiers myself.

I’ll be honest: I can’t stand them. FJB puts on a good show of strength and quality, but deep down it’s frail, brittle and unstable. The ones I’ve handled feel loose and plasticky, and there’s a grinding feel when you turn the keys. They do the job, and they’re everywhere for a reason, since they keep the price of an entry-level guitar down. But if your budget guitar’s tuners feel loose or gritty, pull one and check for an FJB stamp. That’s one swap where a better set of tuners really is an upgrade.

Gotoh, Schaller and Sperzel: the brands that still make their own

Not every tuner comes off a shared line, though. A few brands still design and build their own, and you can usually tell from the stamp.

Gotoh tuners (Japan)

You’ll typically find “Gotoh” or “Made in Japan” stamped on Gotoh hardware. Gotoh builds its parts in its own factory in Isesaki, Japan, and calls itself the only domestic machine head manufacturer in Japan.

Gotoh is often considered one of the best in guitar hardware, and from my own experience I can’t dispute that one bit. Their Kluson-style reproductions, their sealed tuners (which set the mounting standard people call “Gotoh style”), bridges, saddles, and everything in between have all been excellent.

Schaller tuners (Germany)

Schaller still makes its products in Germany, at its plant in Postbauer-Heng, and stamps them “Made in Germany” with full confidence.

Sperzel tuners (USA)

Sperzel is one of the few tuner brands that still makes the whole thing in-house in the United States. The company has been building tuning keys in Cleveland, Ohio since 1977, and in 1983 it introduced the Trim-Lok, the locking tuner that lets you pull the string through the post, tighten the knob, and skip the wraps. According to its official site, Sperzel makes the parts in its Cleveland factory, assembles them there with American workers, and finishes them in the States, including plating and anodizing done in other U.S. shops.

Sperzel says it has put its name on every tuning key since 1977, so you will not get an HC or P.W. stamp here. Look for the Sperzel name on the tuner. If you are used to shared-factory hardware, this is the other end of the spectrum: the same company whose name is on the button is also the one machining the parts.

Boutique guitar hardware made in the USA and UK: MannMade, Mastery, Staytrem and Music City Bridge

Gotoh, Schaller and Sperzel aren’t the only ones still building their own stuff. There’s a newer wave of boutique guitar hardware makers who design and manufacture their parts themselves, in small shops, often for players who’ve already been burned by the stock stuff.

One thing to know up front: most of these companies make bridges, tailpieces and vibratos, not tuners. Only one of them sells tuners at all, and even that one has a twist that fits this whole article.

MannMade USA (Bedford, New Hampshire)

MannMade USA is John Mann’s company, and he’s been working with Paul Reed Smith since the pre-factory days. He helped design and machine early PRS hardware, including the PRS vibrato bridge. MannMade designs and manufactures its bridges, like its PRS-style tremolo and stoptail bridges, in the USA, out of Bedford, New Hampshire, and builds them to drop onto existing guitars with no modifications. Think machined brass bridges for PRS, Fender, Gibson-style and bass guitars.

Here’s the twist. MannMade also sells locking tuner sets for PRS SE guitars, and its own listing says they’re Hanchang tuners modified in the USA by MannMade. So MannMade makes the bridges in New Hampshire, while the tuners start life in the same South Korean factory as the PRS SE stock tuners and get their locking upgrade here. That’s not a knock. It’s just a perfect example of why you read the fine print.

Mastery (Minneapolis, Minnesota)

Mastery is luthier John Woodland’s company, and it’s best known for the Mastery offset bridge and vibrato for Jazzmasters and Jaguars, introduced in 2007. Mastery says it precision-machines all its products in Minneapolis, and its 2024 press release mentions its own machine shop with a newly acquired 4-axis CNC. The lineup has grown to Tele, hardtail and archtop bridges (including one built to work with a Bigsby B3), plus vibratos.

What makes Mastery different is the design. The original Mastery bridge uses two saddles, doesn’t rock, and has locking mounting posts, which tackles a lot of the classic offset bridge complaints. Mastery doesn’t make tuners.

Staytrem (UK)

Staytrem makes bridges and tremolos for the Jaguar, Jazzmaster and Bass VI. Its site says it designs and manufactures the products in the UK, and its FAQ says Staytrem makes all parts itself, with all metal parts in stainless steel.

The Staytrem bridge is a smart rework of the Mustang-style barrel saddle bridge: tighter 52mm string spacing, preset radius saddles, intonation screws held in without springs, and bushings that keep the height screws from creeping down over time. Staytrem doesn’t make tuners either.

Music City Bridge (Nashville, Tennessee)

Music City Bridge came out of Glaser Instruments, the Nashville repair shop, and started with a bridge for session player Tom Bukovac’s 1953 Les Paul Junior. The company says it designs, builds and sells its products from a facility inside Glaser Instruments, so it’s made in Nashville. I couldn’t find details on whether every part is machined in-house or partly outsourced, so I’ll leave it at that.

What I can say is that the products are unique. There’s the Stud Finder wraparound for 1950s Gibsons with offset studs, The Savvy compensated wraparound, the SPACE BAR replacement for Gretsch Space Control bridges, and Groove Master saddles for Tele and Strat. These are problem solvers built around intonation and string spacing, not rebadged parts. No tuners here.

What boutique hardware tells you about the tuner market

Put these four next to Ping-Well, Jin-Ho and Hanchang and you can see the split. Mass-market tuners come from a few big shared factories and get whatever logo the customer wants. Brands like Gotoh, Schaller and Sperzel still make their own tuners. Boutique makers like Mastery and Staytrem build their own parts and put their name on the whole thing. And even a made-in-USA boutique brand like MannMade will start with a Korean tuner when it makes sense. So check where the part was actually made, not just the name on the box.

How to read the stamp: who makes your guitar tuners

Pull a tuner and look at the housing, especially the side that faces the wood. Here’s what I’ve found the markings usually mean when you’re trying to tell who makes guitar tuners.

Stamp or markingManufacturerCountry
GOTOHGotoh Gut Co., Ltd.Japan
Made in GermanySchallerGermany
SPERZELSperzel USAUSA
P.W.Ping-Well (Ping)Taiwan and China
FJBYuyao Boyun Musical Instruments Co., Ltd.China
HCHanchangSouth Korea
JH, Jinho, Jin-Ho, Zee NooJin-HoSouth Korea (with production in China)
No markings (budget)Possibly:
• Guangzhou Hebikuo Musical Instrument Co., Ltd. (Hebikuo)
• Shenzhen Vibetop Technology Co., Ltd. (Vibetop)
• Zunyi Raysen Musical Instrument Manufacture Co., Ltd. (Raysen)
China

One more note: Guyker says it designs and makes its own hardware rather than rebadging someone else’s.

The takeaway: buy tuners for features, fit and feel, not the logo

None of this means any of these tuners are bad. Ping-Well, Jin-Ho and Hanchang build a lot of solid hardware, and plenty of it is great. The point is that the logo on the button doesn’t tell you much about who made the gears. Gotoh, Schaller and Sperzel are the exceptions: the name on the tuner is the company that built it.

So who makes guitar tuners? More often than not, a shared factory with someone else’s name on the button.

And keep in mind that brand doesn’t equal quality. Most guitar companies sell at several price points so beginners and pros can both get in the door. Fender is the easy example: the same company that sells a $150 Squier Debut Strat also builds Fender Custom Shop guitars that can cost 50 times as much. I haven’t confirmed it, but it’s very plausible that hardware makers work the same way, building a budget tuner and a premium one in the same factory, at different specs and prices. So even when you know who made your tuners, the stamp alone doesn’t tell you which tier you got.

What to look for when you shop for tuners

So when you shop for tuners, buy for what actually matters:

  • Fit: post diameter, bushing size, screw position and 3+3 or 6-in-line layout, so you’re not drilling new holes.
  • Features: gear ratio, locking or non-locking, staggered posts, weight.
  • Feel: smoothness, stability, and the look you want on your headstock.

If two sets come from the same factory and one costs $40 more because of the name stamped on it, buy the cheaper one and put the difference toward strings.

FAQ

Who makes Gibson Deluxe tuners?

Ping-Well (Ping), a Taiwanese company with factories in Taiwan and China, commonly makes current Gibson Deluxe tuners. Look for a “P.W.” stamp on the side of the tuner that faces the headstock.

Are Grover tuners the same as Gibson tuners?

The same company makes some of them. The Grover Deluxe and Gibson Deluxe tulip tuners I compared both had a P.W. stamp, meaning Ping-Well made both. Face down, they look identical, and in my experience they work the same. That doesn’t mean every Grover set comes from Ping-Well. Retailers currently list Grover products as made in Taiwan, Korea, China and the USA, so pull a tuner and check the stamp.

Who makes Hipshot tuners?

Hipshot’s manufacturing partner in South Korea, widely identified as Hanchang, makes the licensed tuners, and the HC mark often appears on the housing. Hipshot machines and assembles its USA Ultralite tuners in the United States.

Who makes Graph Tech Ratio tuners?

Graph Tech, a Canadian company based in Delta, British Columbia, designed the Ratio tuners and patented the per-string gear ratio idea (US patent 8,859,868 B2). Graph Tech’s own store lists many Ratio sets as made in South Korea, and Graph Tech has said it has production facilities in Korea. Import records also show Hanchang shipping guitar parts to Graph Tech, but I haven’t seen a Ratio with a factory stamp that settles who built them. If you’ve got a set, check the housing.

Where are Gotoh tuners made?

Gotoh Gut Co., Ltd. makes Gotoh tuners in its own factory in Isesaki, Japan. Gotoh describes itself as the only domestic machine head manufacturer in Japan.

How can I tell who made my guitar tuners?

Remove a tuner and check the housing for a stamp. GOTOH means Gotoh, P.W. means Ping-Well, HC means Hanchang, JH or Jin-Ho or Zee Noo means Jin-Ho, FJB means Yuyao Boyun, SPERZEL means Sperzel, and “Made in Germany” usually means Schaller. I haven’t seen a confirmed factory stamp on Graph Tech Ratio tuners, so if you find a mark, I’d love to know.

Which boutique guitar hardware makers manufacture in the USA?

MannMade USA (Bedford, New Hampshire), Mastery (Minneapolis, Minnesota) and Music City Bridge (Nashville, Tennessee) all say they design and build their hardware in the USA. Staytrem makes its Jaguar, Jazzmaster and Bass VI bridges in the UK.

Do Mastery, Staytrem or Music City Bridge make tuners?

No. Mastery, Staytrem and Music City Bridge make bridges, tremolos, saddles and related parts, not tuners. MannMade USA sells locking tuner sets for PRS SE guitars, but those are Hanchang tuners modified in the USA by MannMade.

All photos in this article are © 2024 11th Fret and are available for licensing with credit.

Leave a Reply

Your email address will not be published. Required fields are marked *

YouTube

Come along for the ride

New reviews and used-gear finds, on YouTube.

Subscribe on YouTube